What can you use instead of Kerdi-fix?
KerdiFix is a single component bonding and sealing compound made of silane-modified polymer bases. … It is odor-neutraland UVand weather-resistant and is free of solvents. It can be used as a sealant, and is able to be used to join Kerdi-Band as well as Kerdi waterproofing membranes to fii components of construction.
Is there a substitute for KERDI-FIX?
I was out of Kerdi-Fix and needed another tube fast and could not be patient for the two days of shipping. After doing a lot of research I came across that the neighborhood hardware store had Sikaflex A polyurethane sealant that bonded KERDI to the same degree of tightness and durable as Kerdi-Fix, as well, if not more so.
Will thinset stick to KERDI-FIX?
Modified thinset mortars shouldn’t be recommended to be used in conjunction with Kerdi due to the fact that they have to dry to improve their strength, while the membrane prevents drying, which could lead to unpredictability in the outcomes. For instance when the shower is applied before the mortar is properly cured leaks and leaching of polymer could be observed. 18-
What can I use as a Kerdi membrane?
The thin-set mortar used in bonding KERDI should be suitable for the substrate and it should penetrate and be able to engage in the KERDI fleece. Typically, Schluter-SET, Schluter ALL-SET and Schluter-FAST-SET or unmodified thin-set mortar are used.
Can you glue Schluter?
The Schluter (r)-KERDI-BOARD with small dabs of adhesive
30 cm , and make sure that the edges of the board are supported completely by glue. Based on the amount of thickness, apply an adhesive that is suitable for bonding. Place the panels on the wall, then fix them and then align them with the aid of the spirit level.
What can I use in place of Kerdi-fix?
Silicone doesn’t seem to stick to Kerdi .
Can I use silicone instead of Kerdi-fix?
KERDI-FIX is required to bond the KERDI membrane to the stainless steel Schluter(r)-KERDI-DRAIN bonding flange and can be used to bond KERDI to building elements such as bathtubs, window elements, and door frames. … Apply KERDI-FIX on the surface and spread evenly using an appropriate trowel. 3.
Do you have to use Kerdi-fix?
Modified thinset mortars shouldn’t be recommended to be used in conjunction with Kerdi due to the fact that they have to dry out in order to increase their strength, while the membrane prevents drying, leading to unpredictably outcomes. For instance when showers are used prior to the mortar is properly cured leaks and polymer leaching may be observed.
Does thinset stick to waterproof membranes?
Thinset is a good choice in place of Redguard in walls. It is recommended to waterproof shelves, niches, and shower walls in general when poly or tar are not being used as a barrier to vapors behind the CBU. … Your tile will then be put directly on the walls, using an appropriate thinset mortar. 23
What does Kerdi-Fix stick to?
Schluter (r)-KERDI-FIX is an all-component sealant and bonding compound made of a silane-modified polymer base. It is odorless, UVand weather-resistant and does not contain solvents. The KERDI-FIX elastomer can be used to attach to many materials, like concrete, stone, wood glass, metal and a variety of plastics .
Can you use tile adhesive on Kerdi?
When done properly, it performs. Schluter Allset is modified and can be used with all Kerdi as well as Ditra products. I have stopped buying other products to set it up since it is faster to set up in comparison to the unmodified ones . 22
Does Kerdi-Fix sealant?
Kerdi-Fix is a one-component sealing and bonding compound made of an altered polymer base that is silane-modified. … It is odor-neutraland UVweather- and ozone-resistant and does not contain solvents. It can be used as a sealant, and can be used to glue Kerdi-Band as well as Kerdi waterproofing membranes to fii components of construction.
What can you use instead of Kerdi fix?
You are able to paint Kerdi board, but you’ll require a thin coating of joint compound, and then perform a bit of sanding. … You can then apply a thin coating of joint compound (mud) over it and sand.
Can you use drywall mud on Kerdi board?
Kerdi system is a type of mortar that Kerdi system is used to install mortar that is thin-set. … Since thin-set mortar is able to work over virtually any surface and is a great choice for drywall, the Kerdi system is able to be used over plywood, drywall as well as the different cement boards discussed in the previous paragraphs.
Can Kerdi membrane be installed over plywood?
In general the case, modified thin-set mortars are not recommended for setting stone and ceramic tile such as large format tiles, on the KERDI membrane. Modified thin-set mortars have to dry in order for the polymers to collide and create a tough film, which will increase the strength.
